There are many sorts of curtain and drape headings and they are made, typically, by the application of a heading tape and a draw cord. Here’s a quick glance at the commonest ones.

Standard

The most common form of curtain heading is the customary one. It is made of an one inch tape that’s gathered up into a narrow, even heading. This is most frequently used for casual curtains and in hidden areas, underneath valences and behind pelmets for instance. While employing this strategy of curtain heading on net curtains or sheer, lightweight drapes a synthetic tape is offered so ensuring that a strengthened curtain rod is not required.
The customary form of curtain heading is often used on dormer windows and cottage windows. It just uses one and a half times the width of the curtain and so is highly economical on materials

Pencil Pleat

The pencil pleat is used where there is no valance or pelmet and it gives a pleasant finish at the curtain header. The majority of interior decorating designs will be improved by this type of drape heading, especially modern ones. Remember to permit about two and half times the width of the window in material to allow the pleats to present themselves nicely.

French Pleat

This style of curtain heading is often known as the french pleat. It is commonly used with extra stiffener in the cloth to supply full, regular folds in heavy fabric, velvet as an example. As with the pencil pleat it’s critical to permit at least 2 and a half times the width of the window in fabric to allow the pleats to achieve their fullness and to provide a pleasing effect. The pleats are usually fanned across the window and have a button sewn to the bottom of each one.

Cartridge Pleat

This is sometimes called a goblet pleat and takes it’s name from the goblet shape that’s fashioned in the top of each pleat. This shape is held by stuffing polyester or tissue paper into the top of each pole to help the curtain retain it’s shape. It is most customarily utilized in formal settings where the curtains are full length and have a very formal feel to them.

Slot Pleat

As the name implies this is simply a pleat formed by cutting slots in a cased header tape to feed a pole thru. It can be improved by permitting a quantity of curtain to stand above the header tape. Once again make sure that you permit twice to three times the length of the opening to give a lovely finish and to permit the pleats to stand up.

Puff Ball Heading:

This is a particularly impressive curtain heading that is more simple to realize than you may imagine. You utilize the same methodology as for a slot pleat, permitting at least 12 inches of fabric higher than the slot. The curtain is then fed onto the pole and the surplus above the header tape is simply balled up into a puffball shape.

Whichever curtain header you decide to use you may be sure that a little time and effort will provoke visitors who look into and out of your windows. To locate the righ ones be certain to shop all the key mini blinds and vinyl mini blinds manufacturer sites.